| I&T Solution |
Water Tap Hydropower Generator Module
(REF: S-1343) |
| Trial Project |
|
| Solution Feature |
- To support power supply for water tap motion sensor with significant efficiency green energy that could be converted during the water flow in the water tap.
- Electricity generated during water pass through the water tap and stored in the smart control module. The stored electricity would use to power up the water tap motion sensor.
- Hydropower Generator install in water tube and convert hydropower to motion energy. Then the motion energy convert to electricity by a DC generator and the electricity transfer to the smart control module for storage. The smart control module supply power to the water tap motion sensor.
- The maximum voltage store in the smart control module is 6V and the output voltage is 3V. If the water tap is not operating for 60 days, the voltage store in the smart control module is 4.2V and the output voltage is 2.5V.
- The output power of the Hydropower Generator is 0.12W and 0.45W when the water flow rate is 3L/min and 12L/min.
|
| Trial Application and Expected Outcome |
- On site testing for performance of generating voltage in daily use
- On site installation to test the safety issue under the high water pressure
- Electric capacity storage and release ability test in certain cycles
- Hydropower generator rotation speed and conversion rate
|
| Additional Solution Information |
Water Tap Hydropower Generator Module.pdf
|
| Info on I&T Solution Provider |
| Solution Provider | : | The Hong Kong Productivity Council | | Address | : | HKPC Building, 78 Tat Chee Avenue, Kowloon, Hong Kong | | Contact Person | : | Li Kwan Tai |
| Position | : | Senior Consultant | | Tel | : | 2788 5793 | | Email | : |
ktli@hkpc.org | | Webpage | : | https://www.hkpc.org |
|
