| I&T Solution |
Intelligent Air Duct Sealing Technology
(REF: S-1502) |
| Trial Project |
|
| Solution Feature |
- The technology injects a fog of aerosolized sealant into pressurized ductwork to seal air leaks from the inside. It relies on a software-based system to continuously measure airflow and leakage throughout the sealing process.
- Water-based sealant particles accumulate only where leaks are located, completely closing them off. It is non-invasive and eliminated the need to tear down walls or strip off insulation.
- The system records results in real-time, stopping when desired levels have been reached. Our process is more cost-effective and consistent than manual sealing.
- Water-based sealant uses a safe, vinyl-acetate polymer that gives no VOC off-gassing once dry after applying. It gives off no odor left in the HVAC system.
- The sealant complies with some of the industry's most exacting requirements. HKFSD approved; comply with BS476 Part 6 & Part 7.
|
| Trial Application and Expected Outcome |
- Suitable for new and existing buildings, such as: office buildings, commercial complexes, laboratories, and medical centers, etc.
- Applicable duct types: iron duct, stainless steel duct, UPVC duct and concrete duct.
- Fan power drops by reducing duct leaks to achieve energy saving.
- A Certificate of Completion will be provided to validate the reduction in leakage in the sealed section.
- Reduce the air duct leakage up to 90%.
|
| Additional Solution Information |
Aeroseal leaflet_v2_compressed.pdf
|
| Info on I&T Solution Provider |
| Solution Provider | : | Aeroseal (HK) Limited | | Address | : | 3/F Unit A, Kader Building, 22 Kai Cheung Road, Kowloon Bay, Hong Kong. | | Contact Person | : | Mr. Ivan Lee |
| Position | : | CEO | | Tel | : | 852-2511 2118 | | Email | : |
ivanlee@dpx.hk | | Webpage | : | https://aeroseal.com/ |
|
