| I&T Solution |
Perovskite solar modules (made in Hong Kong)
(REF: S-1950) |
| Trial Project |
|
| Solution Feature |
- Perovskite PV exhibits high PCE under low light conditions, higher than crystalline silicon PV
- Enables full coverage of building facades/rooftops, significantly increasing power output per unit area
- Supports custom shapes and colors, seamlessly integrating with curved glass and unconventional architectural designs
- Blocks over full spectrum, reducing cooling loads while maintaining indoor visual comfort
- Adjustable transparency (5%-80%) meets diverse needs for daylighting, shading, and curtain walls
|
| Trial Application and Expected Outcome |
- Developing 300×300 mm2 perovskite modules with active-area PCE surpassing 20%
- Under IEC 61215 accelerated aging conditions, prepared modules show less than 10% PCE degradation after 1000 hours
- 300mm*300mm perovskite modules are arranged in a 4*1 array to form an aluminum-framed power-generating window assembly
- 1200 mm*300 mm semi-transparent perovskite window modules deliver an annual energy yield of 10 kWh when south-west oriented
- The semi-transparent BIPV maintains over 5% visible light transmittance and an SHGC of 0.5
|
| Additional Solution Information |
EMSD Trial Project.docx
|
| Info on I&T Solution Provider |
| Solution Provider | : | Yuanyuan ZHOU, The Hong Kong University of Science and Technology | | Address | : | The Hong Kong University of Science and Technology, Clear Water Bay, Hong Kong SAR, China | | Contact Person | : | Yuanyuan ZHOU |
| Position | : | Professor | | Tel | : | (852) 2358 7137 | | Email | : |
yyzhou@ust.hk | | Webpage | : | https://www.alvinyzhou.com/ |
|
